Fix: Windows Resource Protection Could Not Perform The Requested Operation

Windows Resource Protection is an important component of the Windows operating system. It protects your system files and data by scanning drives for problems and automatically repairing damaged files.

It can happen that Resource Protection fails to scan one or more drives and you will get the error message “Windows Resource Protection Could Not Perform The Requested Operation”.

This article will discuss why you receive this error message, what causes it, how to fix it as well as courses of action if you are unable to fix it.

What Is The Cause Behind the Window Resource Protection SFC Scan Error?

The cause behind the Window Resource Protection SFC Scan Error is usually a failed system file.

This is one of the most common reasons. When a system file becomes corrupt, Windows Resource Protection cannot correct it and will display an error message informing you of the issue.

Solutions on “Windows Resource Protection Could Not Perform the Requested Operation”

1. Ensure that the drive you are trying to scan is not currently in use. This can be done by checking if the drive letter appears in your Windows taskbar.

2. Make sure your computer has enough system resources available to complete the scan. This can be done by clicking on “Start” and then going to “Control Panel” > “System and Security” > click on “System” tab > System Monitor > Processes tab to see how many processes are running on your machine at a time.

If there are too many running, it may slow down the scan process and cause Resource Protection errors like this one.

3. Modify the registry settings of Resource Protection. To do this, open up regedit and navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRescueOperations\{8DFC3A7F-B9C6-4534-8EF0-B452113A3331} (64bit) or HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRescueOperations \{8DFC3A7F-B9C6-4534-8EF0-B452113A3331} (32bit).

If you still having the issue, we highly recommend you to follow our best worked methods in solving the “Windows Resource Protection Could Not Perform the Requested Operation” error.

Also Read: Top 7 working ways to Fix: ‘Slow internet windows 10’ issue

Method 1: Run a CHKDSK of Your Hard Drive

A common reason why Windows Resource Protection fails to scan your drive is that it is locked.

To fix this, you will need to run a CHKDSK of your hard drive. This can be done by accessing the Command Prompt in Safe Mode and typing “chkdsk /f/x/r”.

If you are unable to fix it, then your next course of action might be to uninstall the software that caused the problem.

Method 2: Run Your SFC Scannow in Safe Mode

The first thing you should do when Windows Resource Protection could not perform the requested operation is to run your SFC scannow in safe mode.

SFC stands for System File Checker and scannow is a tool that scans for and repairs corrupted system files.

To use it in safe mode, type sfc /scannow into the command prompt.

Safe Mode will only allow essential system files to be loaded, so you can fix any problems that would otherwise prevent your computer from booting up properly.

If you are unable to scan one or more drives, then run your SFC scannow in normal mode by typing sfc /scannow at the command prompt.

Method 3: Modify Security Descriptors in WinSXS Folder.

One of the most common reasons why Windows Resource Protection fails to scan one or more drives is that you have modified the security descriptor in WinSXS folder.

If you modify the security descriptor manually without restarting your computer, Resource Protection won’t be able to correctly identify and scan your hard drive.

To correct this issue, you must modify your security descriptors in WinSXS folder so that Resource Protection can properly identify and scan your hard drive for errors. To do this, follow these steps:

1) Press Windows+R on your keyboard and type secpol.msc

2) In Security Policy Manager (secpol), click Change Default Security Descriptors

3) Select Defaults from the Type drop-down menu

4) Click Edit… on the right side of each security descriptor. For example, if you want to change “SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management” security descriptor, then select it and click Edit… on the right side of it.

5) Change Permitted to Full Control under Owner for appropriate users listed in System Security tab. For example, if a user named UserName is listed as one of the owners for this object as seen in System Security tab, then change its owner from NT AUTHORITY\SYSTEM to NT AUTHORITY\UserName

Also Read: Fix: System Thread Exception Not Handled Error in Windows 10

Method 4: Enable Windows Module Installer.

The first thing you should do is to enable Windows Module Installer.

Open your registry editor by typing “regedit” in the search bar of your start menu, and then launch the registry editor.

Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon and make sure that the value “Shell” is set to “explorer.exe”.

Once you have completed this step, restart your computer and try scanning again.

Method 5: Run Recovery Commands.

If you receive the error message “Windows Resource Protection Could Not Perform The Requested Operation”, sometimes you can fix the issue by running recovery commands.

Depending on which command is run, it should be able to fix the issue.

For example, if you have a corrupt system file and Resource Protection cannot scan for it, run the following command:

SFC /scannow

This will scan all protected drives for any corrupted files and attempt to correct them.

Method 6: Perform an Automatic Repair

If Resource Protection fails to scan a drive and you are unable to fix it manually, you should perform an automatic repair. To do this, follow these steps:

1) Open the Control Panel by clicking on Start and then All Programs or typing “Control Panel” in the Run box.

2) Select Windows Update from the list of programs under System and Security.

3) Select your operating system from the list of options to display update options for your computer’s operating system.

4) Click Check for updates to schedule a time when your computer will automatically check for available updates through Windows Update.

5) The automatic repair option is located under Automatic Repair in Windows Update.

This will attempt to scan your drives and automatically repair any damaged files that may be detected by Resource Protection.

Method 7: Run DISM commands

If you are unable to fix the problem after trying the solutions provided here, then you should run the DISM command.

This will scan your system for errors and fix them. To run the DISM command in Windows 10, type this into Cortana: “How do I scan for and repair errors in Windows?”

In many cases, running this tool fixes problems with Resource Protection not scanning drives.

Method 8: Repair Install Windows

1. Login into an administrator account in Windows 10 PC.

2. Disable or remove 3rd party antivirus application program you have installed. You can reinstall the application after Windows 10 has finished installing.

3. Download the latest Windows 10 ISO file from Microsoft official website.

4. You need to Double click to mount the ISO file. At the root directory, double click to run the setup.exe file.

5. Windows 10 Setup window pops up on the screen, then select Download and install updates, and click on Next.

6. On the License aggreement page, select Accept.

7. The Setup will now check for any available updates from the microsoft.

8. When Windows 10 start for an intallations , you’ll notice a recap of what you’ve chosen, and what will be kept through the upgrade. Keep personal files and apps is selected by default, and you can switch the option by clicking Change what to keep.

This way you can Repair the windows and solve the error of “Windows Resource Protection Could Not Perform the Requested Operation”.