any Hisense TV users reported that they are facing an issue with their home television, as the ‘Hisense TV Red Light Blinks 2 Times‘ in a row every few seconds.
This makes Hisense users scared and confused with doubts about what might have caused this error and why it’s blinking after a few seconds.
To get rid of this issue, you need to understand how this issue occurred in Hisense TV and how you can easily fix it on your own.
So in this article, you don’t have to worry, all your doubts will be cleared and I will simplify the information to the solution you need.
So why wait, let’s get started.
Why Hisense TV Red Light Blinks 2 Times?
Mostly this issue occurs if the Hisense TV goes into standby mode after some time and you don’t know how to get it back. Another reason could be the power supply path from the wall outlet to Hisense TV’s circuit power board or the circuit board itself might have the issue.
If the below fixes could not solve or fix the issue, then you might need to carry the Hisense TV to repair center for any components change.
If Your Hisense TV is under warranty, then you might contact the Hisense service center for quick rectification, contact details are provided below.
Also Read: How to Fix Hisense TV Red Light Blinks 3 Times
How to Fix Hisense TV Red Light Blinks 2 times Quickly?
Based on the cause of the issue you need to perform the solution task on the Red light blink issue.
Many Hisense TV users have performed the below fixes and found satisfaction with the issue.
Note: Before attempting fixes, if the Hisense TV is under warranty do not unscrew the panel and open the TV, as this will void the warranty service in future.
Below are the troubleshooting steps to initiate one by one and stop anywhere once your issue gets resolved.
1. Power Cycle Your Hisense TV
We have seen many times that most Hisense TV with red light blinking issues gets fixed by switching off the Power supply.
Sometimes the power supply in the board gets obstructed due to the low voltage supply or any other components failure, so better to power off the Hisense TV and power on the TV after a few minutes.
How to do it?
- Just power off the TV with the remote control and remove the power cord from the wall socket.
- Keep the Hisense TV ideal for 30 minutes so that all the components within the television cool down.
- Then plug the power cord back into the wall socket and turn on the Hisense TV.
This is one of the simple solutions with a definite effect on your TV.
Do comment in the comment section below, whether this solution has helped you with your issue or not.
2. Try to reset your Hisense TV
If the power cycle does not solve the issue of ‘Hisense TV Red Light Blinks 2 Times’ then it’s time to reset your Hisense TV and check for the issue, if it persists again.
The reset procedure is quite simple and easy to perform on your own, as this might solve your issue permanently.
Note: Some of you might not know what is resetting, it means whatever changes you have made in its configurations will be wiped out, and the device gets its default setting once you press the power reset button.
Resetting your Hisense TV will clear any bugs present in the software part that can cause malfunction to your device.
- Before touching the power reset button, ensure that the power cable has been removed from the socket and that other peripheral USB drives and HDMI cables have been unplugged.
- Then press and hold the power button for 30 seconds and leave it.
- Finally, plug in the power cable and power on the Hisense TV.
Later check if the issue is solved by the reset method.
3. Any Hardware Failure
No doubt Hisense Tv components are very durable and quality once, but sometimes it may happen that due to high power voltage supply into the circuit board may lead to damage in the parts like resistors, capacitors, ICs or any voltage regulator.
After performing a reset task on your Hisense TV, if the things don’t change, then there might be any hardware failure, you need to take it to the repair center to find out which part is damaged.
4. Hisense Support Service
One suggestion from my side is to check if your LED TV is under warranty, and if it is under warranty then what all parts are covered in it.
Check in the warranty card or you can directly contact your service provider, if you find that your TV can be covered then before taking it to the repair center, try to take support from the technician,
Technicians might solve the Hisense TV Red Light Blinks 2 Times issue in no time.
Contact details of the Hisense support team
5. Visit LED TV Repair Center
If your TV’s warranty has expired then it is better you take a call to visit your nearest repair TV showroom and show it to the TV technician, he might determine the cause of blinking the red light twice and accordingly solve the issue.
So if your Hisense TV red light blinks 2 times in a row then do not hesitate to visit the repair center.
Also Read: Why Hisense TV Red Light Blinks 6 Times?
People Also Ask
Why does the Hisense TV red light blinks 3 times.
If the Hisense TV red light blinks 3 times that means your TV is having an internal circuit board issue, you can take your Hisense TV to the repair shop for diagnostics.
Why does the Hisense TV red light blink 6 times?
If the Hisense
TV blinks red light 6 times in a row then it means there is an issue in the backlight, or a malfunction in the circuit board or power board.
Why does the Hisense TV red light blink 5 times?
If the Hisense TV red light blinks 5 times then it indicates that the power board of the TV is faulty and needs to be replaced by the repair center.
Let’s conclude the post on Hisense TV Red Light Blinks 2 Times.
I hope that you might have followed the above troubleshooting methods and solved the red light blinking issue from your Hisense TV.
Do comment for any other solution that you have discovered apart from our above-mentioned methods in the comments section.