You are here because your pc is giving a message of Blue Screen of Death (BSOD) on your screen with a Critical Process Died error code and it is interrupting your work and asking to restart your computer, then you can breathe a sigh of relief: we have some best working solutions for you.
This blog will tell you the best working ways to fix critical process errors in Windows 10. It is a blue screen of death error that can appear due to corrupt system files, certain Windows updates, faulty programs/apps or drivers, etc. Due to this error in the BSOD, Windows may crash resulting in complete loss of lead data.
Causes for Critical Process Died Error?
When the computer operating system detects that an unauthorized application has modified to its certain application data it immediately steps in, causing the Critical Process Died error to happen. Thus it ensures that only authorized applications within the computer can access data and parts of the system.
Another reason for the critical process died (BSOD) error is the error code 0x000000EF. This BSOD error occurs more often hence, it can be difficult to determine the cause.
There are many reasons the cause of error like Driver issues, corrupted system files, a bad system update that can directly impact your Windows system performance. So here are some steps you can try and resolve the issue using these solutions given below.
Solution 1: Restart the computer in safe mode
Generally, this error can render your desktop or laptop unusable and you have to restart your computer. This problem occurs every time you restart your computer. In this case, you can restart your computer in Safe Mode.
This is a fairly quick way to start up your Windows computer system, which can prevent this error from appearing during the computer startup process.
- Restart your Windows.
- Press Shift+F8 before Windows loads, so enter Recovery Mode from where you can boot into Safe Mode.
- Then you have to go to advanced startup options and set startup mode as Safe Mode to unlock your computer.
There are other ways to enter Safe Mode as well. Please use the installation CD or restart your computer several times to start WinRE. Then click Troubleshooting → Advanced Options → Startup Settings → Restart. You will get the following screenshot; Press the appropriate button to enter Safe Mode.
Then check for the error of Critical Process Died Windows 10.
Solution 2: Update all drivers to Fix Critical Process Died Error
After restarting your computer in Safe Mode, you should check for errors in all drivers on your device. Usually, many blue screen errors like error 0x000000ef can be caused by hardware or drivers. Please follow the instructions below:
- You can go to Device Manager by pressing Win + X.
- Start by checking all the drivers. If you find a driver with a yellow exclamation mark, it means the driver has some defects.
- In this case, you will have to uninstall and reinstall this driver.
Also, after upgrading, hardware drivers may no longer be compatible with your Windows system. Therefore, you need to update all drivers by right-clicking the driver and selecting Update Driver Software. This is a useful solution for dead critical processes in Windows 10.
Solution 3: Run system file check
The next step is to run the System File Checker tool. It is a well-known program that can cure a wide variety of Windows-based benefits by repairing corrupted or improperly modified system files.
In fact, it’s not always useful; People do it out of habit rather than necessity. In the case of error code 0x000000EF, this is an important troubleshooting step.
To run the scan, you need to run the command prompt as administrator. The easiest way is to start a cmd search,
- Right-click on the result and select Run as administrator.
- Check Windows system files
- Once Command Prompt opens, type SFC /scannow and press Enter. The process can take some time.
Once done, you will see a list of all the problems on the screen and the steps the scan took to fix them.
Make sure to restart your computer before continuing.
It also helps debug Bad System Config info.
Solution 4: Clean computer start
- Type system configuration in the search box and press Enter.
- On the Services tab, select the Hide all Microsoft services check box, and then click Disable all.
- Click Open Task Manager.
- On the Home tab of the Task Manager, select all items and click Disable.
- Close task manager.
- On the Home tab of the System Configuration dialog box, click OK, and then restart your computer.
- Clean Boot starts Windows with a minimal set of drivers and startup programs, making it ideal for troubleshooting.
Solution 5: Use SFC / Scannow
If the Windows 10 Critical Process Died shutdown code occurs, it could be caused by corrupted or missing system files. In this case, you can check the file system using the SFC / Scannow command.
When this system file scanner detects that a protected file has been replaced with the wrong file, it will extract the correct system file from the system file archive (i.e. dllcache) and replace the wrong file. This command is useful for repairing system files and you can do the following:
- Enter the command line in the search box. Then right–click on Command Prompt and select Run as administrator to open a command window.
- Type sfc /scannow and press Enter. You will have to wait a few minutes for the system scan to complete.
- If the scan reaches 100% and there are no corrupt system files, you may get a message that says “Windows Resource Protection could not find any integrity violation”.
If there are errors in system files, this tool can find them and fix them. Messages like “Windows Resource Protection” found corrupt files and managed to fix them. Details can be found in CBS.Log windir\Logs\CBS\CBS.log. Example: C:\Windows\Logs\CBS\CBS.log. Please note that registration is not currently supported in offline service scenarios. “
At the end, you will have to restart your computer every time this command line repairs a file.
Then check for the error of Critical Process Died Windows 10 persists.
Solution 6: Return to the previous operating state
Let’s say your operating system is working fine until you install a new update or driver. The simplest solution to clearing the Critical_Process_Died error is to return to the previous operating state.
You can manually uninstall the problematic software or use System Restore to go back in time and use the backups that Windows 10 automatically creates before making major system updates or changes.
- Open the start menu.
- Enter “System Restore“
- Click the Create restore point option.
- Under System Protection, click System Restore…
- A dialog box will appear with all the available restore points.
- Select any restore point and confirm your choice.
- Wait for Windows to complete the changes.
Although the recovery function does not delete your personal documents and files, some applications and settings can be deleted. Windows 10 lets you check which programs and drivers will be removed when you revert to a previous version. Save it and then use it with extreme care to reinstall it.
Solution 7: Scan for malware
With about 200,000 new malware samples released every day, no computer connected to the Internet is completely secure. While modern anti-malware solutions provide reasonable protection against the latest cyber threats, your operating system may still be infected and you may not know it.
We recommend on-demand malware scanners such as Malwarebytes Anti-Malware, AdwCleaner, HitmanPro, or SUPERAntiSpyware. This advanced security solution can work with your current antivirus scanner and increase your chances of catching even the worst cyber bugs before they can do any harm.
Remember that you should always treat the cause of the infection and not just apply a plaster. Consider turning off Flash in your web browser, installing an ad blocker, and avoiding dangerous websites with invasive add-ons.
Then check for the error of Critical Process Died Windows 10 if still exists.
Solution 8: Reinstall your operating system
If all else fails, it’s time to reinstall your operating system. Sometimes it’s quicker and easier to back up important data and start over than to spend hours searching for the right solution.
Take a USB device, backup documents, music, photos, videos, and anything else you don’t want to lose, and find the official Windows 10 installation media. Allow the installer to wipe your entire system partition and complete the installation process to completion.
Before you start installing the system drivers and software of your choice, spend a few hours using Windows 10 without any extras to check if reinstalling fixed the Critical_Process_Died error. If you are sure, add the program slowly. It always takes a long time for everything to work properly.
Verdict on Critical Process Died Windows 10
If you try any of the methods above, you should fix the Windows 10 Critical Process Died Windows 10 error in no time. The good news is that once it’s fixed, it’s impossible to go back. Additionally, the methods described in this article can be used to diagnose and repair many BSoD error codes and other computer problems.