For ordinary Windows users, there may be a situation where the Computer Randomly Restarts. This is usually useful because Windows is designed to reboot (especially the BSOD) when this error occurs.
There are features and options to enable or disable this feature. However, it becomes a problem when the ‘pc randomly restarts’ without mistakes.
In many cases, users have complained about restarting their PC without warning or error. This can be a problem as it can happen at any time, like while playing games or during performing any task on pc, etc.
Several things can cause this problem. If this is the auto-restart feature, you will likely restart the system if it is not working correctly or you don’t have enough time to check for error messages.
There is also a risk of overheating and power failure. Bad RAM may be the cause of the problem. In other words, it’s usually a hardware problem (especially overheating) with the RAM, PSU, or GPU. Rare causes for this situation are also driver problems.
What are the methods to Solve Computer Randomly Restarts on Windows 10?
You can check some of the content in the following ways. Therefore, carefully consider each method until the problem is resolved.
But before that, it is very common that sometimes the data may be lost or corrupted after a computer restart in Windows 10.
If all your important downloads and documents are lost or corrupt, what should you do to get these files back?
When finding files are lost, you can go to File Explorer, type the name of the lost file in the search bar, and Enter to check whether it is there or not. If not then, you can use the free data recovery software to restore files lost after computer restart.
Method 1: Disable the automatic restart feature
The first thing to do is to turn off the auto-restart feature. This can reduce the size of the cause of the error. Disabling this feature can help you determine whether a restart error causes it or not.
This is mainly because the automatic restart function restarts the PC without displaying an error message. So if the cause of the problem is the same, you should turn it off as shown on the screen.
Steps to Uncheck the automatic restart option:
1. Right-click on This PC in windows 10 system and click on Properties.
2. Then click ‘Advanced System settings‘ appearing on the left side.
3. Then go to Advanced tab, click Settings under the Startup and Recovery section.
4. Uncheck “Automatically restart” option under System failure and click OK.
Follow the steps to uncheck the automatic restart and get rid of the error “pc randomly restarts“, if this method doesn’t contribute to your issue, then move to our next solution methods.
Method 2: RAM could be a reason for ‘Computer Randomly Restarts‘
The first thing to do is check the RAM. Bad RAM can also cause problems that are easy to track. You can do this manually as you can use ‘MemTest86‘ to check your RAM or put in one RAM key at a time to determine the cause of the reboot. You can run a benchmark test to see if your RAM is lagging.
Checking the RAM with MemTest86 is a tedious task. Hence, it is recommended to run a manual scan.
How MemTest86 works?
- MemTest86 is a program that checks for RAM problems. This program is very reliable, but it takes time.
- Click here to download the program
- You can read more about using MemTest86.
- When you configure MemTest86 and restart your computer, MemTest86 will run automatically. You can see everything on the blue screen
- Run 7-8 tests and check all locations for accurate results
- If you see red results, it means your RAM is damaged. Delete it and scan your PC for any problems.
The manual method is the easiest to solve the problem of Computer Randomly Restarts, but you must open the system chassis. Follow the steps below
· Shut down the computer
· Disconnect the system
· Open the side cover of the computer case or the back cover of the laptop. To do this, open the lock or unlock the lid.
· You will see some narrow but long poles on the board. More than one may exist, but they are placed together
· Unlock it, and you can remove it
· If you have multiple RAM keys, remove them. Here you put RAM in the card once to see which one caused the reboot. The cause of the problem is one of the reasons for the problem.
If there is only one stick, it must be exchanged for another (temporary) stick. You can get them on PCs and other stores, but make sure to check nodes and types. Additional RAM must be compatible with the system.
Method 3: Check if your computer is overheating.
You should also check the system for overheating issues. If the system overheats while the program is running, it will restart automatically.
So if the system reboots from some program or while running a program that usually uses a lot of resources, most likely the cause is overheating.
Troubleshooting can be identified in two ways: measuring the temperature using third-party software and controlling the sensors using built-in hardware.
CPUID is software that allows you to measure the temperature of your computer. You can use this tool to measure the temperature while playing and see if the temperature is inside or not.
Click here and to download HW Monitor Pro.
After downloading, run the downloaded file and install it.
You can run the program to keep it in the background. Then play or run other resource-intensive programs. Check the temperature and voltage after a few minutes.
As mentioned above, you can use the BIOS to control the estimated value and the system voltage. Most systems have built-in sensors. Follow these steps to check your system’s sensors:
· Press F2 when the manufacturer’s logo appears. Keys vary by manufacturer, but you can try F10 and Del. When the manufacturer’s logo appears, a button will appear in the corner of the screen, so be sure. So be careful and hit the button above.
· If not, enter the BIOS, and you will see a menu with several options. One of those options is the BIOS setup or the BIOS menu (or several variants thereof). You can use the arrow keys to scroll through the list and select the BIOS options. Press Enter to access the options.
· Use the following arrow keys to select H / W Monitor or Status (or by manufacturer) and press Enter.
· In this section, you can check the temperature and voltage measurements.
· Make sure to read within limits. The CPUID software has limitations, but you can use Google for specific devices if you’re not sure. If the reading is not within this range, there is an overheating problem.
Helpful Tip on Computer Randomly Restarts error
Hope you find this article interesting on the ‘Computer Randomly Restarts‘ issue, If the problem is related to your computer or laptop, you should scan the storage and try to use Restore Repair, which can replace some damaged or missing files. In most cases, this is effective as a system crash causes the problem. The restore software can be downloaded by clicking here.